home *** CD-ROM | disk | FTP | other *** search
- >From: Larry Shuford <shuford_la@MIKE.LRC.EDU>
- >Subject: Help with Amilink connections
- >
- >Anyway, its an AMILINK IMC card... (controls 2 BetaSP decks from the card)
- >It has 5 BNCs and I was using only 3 of them... Reference In, Ref. Out and
- >a COMM connection to an external VLAN box (for a third machine).
- >Assuming the top BNC is #1... What are the IDs of the jacks?
- >
- >Thanks for any help you all might have...
-
-
- 1 - Reference In
- 2 - Reference Out
- 3 - Color Frame (rarely used)
- 4 - COM (VLAN) In
- 5 - COM (VLAN) Out
-
- #4 and #5 will be used only if you have either a POD controller, or A/B-Roll
- setup, or an extra external VLAN controller for a parallel deck or switcher. If
- you have a CUTS system, only #1 and #2 will be used.
-
- Good Luck!
-
- ---------------------------------------------------------------------
- [ John Crookshank | MicroTech Solutions, Inc. ]
- [ johnc@bbs.xnet.com | BBS:708-851-3929 Voice:708-851-3033 ]
- ---------------------------------------------------------------------
-
-